1, My Address, My Street, New York City, NY, USA
+1234567890
image_2023_11_21T06_37_13_676Z
Canon MG2920 Setup on your Computer and Mac
admin
February 16, 2024
7:06 am
Canon MG2920 Setup

The Canon MG2920 printer is efficient and provides quality printing and versatility. Setting up the Canon MG2920 Printer involves straight steps. Here is a guide for the Canon MG2920 Setup. Just read the steps carefully and complete the setup Canon Printer setup process.

Canon MG2920 Setup

Before you begin, ensure that your WiFi network is running and have the network name (SSID) and password.

Unboxing

  • Unpack the Canon MG2920 printer and remove any protective packaging.
  • Then plug in the Canon MG2920 printer. Connect the printer to a power source and push the "ON" button to turn it on.

Install Ink Cartridges

  • Open the Canon printer lid and install the ink cartridges according to the instructions. After inserting the cartridges, close the cover.
  • Then, load the paper. Put plain, letter, or A4-sized paper in the paper tray.
  • Access Wireless Setup Mode:
  • On the printer's control panel, press and hold the Wi-Fi button (typically represented by a wireless icon) until the power lamp begins to flash.
  • Connect to Wi-Fi.
  • Then go to the computer's Wi-Fi settings and connect to the network.

Download and Install Canon MG2920 Printer Software

  • Open a web browser and navigate to the Canon support page. Search for and download the MG2920 printer software and drivers.
  • To install the printer software, follow the onscreen instructions. During installation, you have to choose a connection method. Then, select "Wireless Connection."
  • During the setup process, choose your Wi-Fi network and provide your password (security key). Make sure you have the correct SSID and Wi-Fi password.

Complete the Canon MG2920 Setup

  • Then follow the on-screen instructions to finish the Canon MG2920 Setup. The setup process will configure the printer to connect to your Wi-Fi network.

Print a test page

  • After you have completed the Canon MG2920 setup, print a test page to ensure that your Canon MG2920 is connected and working properly.

Install the Canon Print App

  • Install the Canon PRINT app on your mobile device to quickly print and scan from your smartphone or tablet.
  • Finally, your Canon MG2920 wireless inkjet printer is now set up and ready for use. You can print wirelessly using your computer or mobile device. If you have any problems throughout the setup procedure, consult the printer's manual or contact Canon customer service for help.

Canon MG2920 Wireless Setup

You can use Canon PRINT or the SELPHY app to easily set up a Canon MG2920 wireless setup to print photos and documents wirelessly.

Here are the steps to follow to start easy Canon MG9290 Wireless Setup

  • Hold down the printer's Wi-Fi button until the alarm lamp flashes twice, then release the button.
  • Then open the Canon PRINT Inkjet / SELPHY app for Android devices.
  • When you initially open Canon PRINT Inkjet / SELPHY, you may be asked to give the app permission to access your storage and location. Tap Yes.
  • After that, you will see some information about this application. Allow the permission.
  • Click the Camera, Location, and Storage switches on the right. Then, tap the left arrow in the upper left.
  • Tap the square at the bottom of the screen to view the open apps. To proceed, tap on the Canon PRINT Inkjet / SELPHY app.
  • When this screen appears, select Yes.
  • You will be requested to enable Wi-Fi for the printer. The name will begin with Canon_ij. Depending on the model, it may be Canon_ij_setup or the printer's name, such as Canon_ij_053xx_MG2920series. Tap OK on this screen.
  • A popup will appear stating that the printer will be linked to your wireless network. Please ensure that your network name is shown in this message. Then press Yes.
  • Enter your wireless router password. You can reveal the password by tapping the eye icon to the right. After you have entered your password, tap OK.
  • If the cableless setup procedure fails at this point, you may need to restart it and reconnect your Android device.
  • After a few moments, you will get a notice indicating that the network settings have been transmitted to the printer. Select OK.
  • The wireless connection is complete.

Canon MG2920 Setup Using WPS (PIN CODE)

  • First, download the Canon PRINT app to your phone.
  • Hold down the Stop button on your printer until the Alarm lamp flashes 15 times, then release the Stop button after the fifteenth flash. The wireless connection settings information including the PIN code will be printed.
  • After that, hold down the Stop button on your Canon printer until the Alarm lamp flashes 16 times, then release the Stop button after the sixteenth light flashes.
  • Follow the on-screen instructions in the Canon PRINT app on your phone to set the WPS (PIN CODE) provided on the printed Network Configuration Page to the access point.
  • Make sure that the Wi-Fi light on the printer is on.
  • Once your printer is connected to your network, review the page it printed after you held down the stop button for 15 flashes. There should be an IPv4 IP address on the page.
  • Then, type this IP address into your Chromebook's address bar and press Enter.
  • You will be prompted for a username and password. Use ADMIN as the username and Canon as the password.
  • Finally, you can access your Canon printer.

Canon MG2920 Setup Without CD

  • First, make sure that your Canon printer is turned on.
  • Then press and hold the WiFi button on your Canon printer until the alarm lamp flashes at least once.
  • Make sure that the lamp next to the printer button flashes blue.
  • After that, go to the printer’s access point and press the WPS button within 2 minutes.
  • Once your printer is successfully connected to your wireless network, then both the power and the WiFi lamp will stops flashing to show a stable light.
  • Next, you need to download your Canon printer driver from canon official website.
  • Then, follow the on screen instructions to install the Canon Printer Driver.
  • After the installation process is complete, go to Control Panel and select Devices and Printers.
  • Here, you see your Canon MG2920 printer with a green check mark on it and it is ready for use.

To conclude, the correct Canon MG2920 Setup ensures seamless printing from your mobile device or computer. And also it's necessary to install the correct driver for your Canon MG2920 printer to work efficiently.

Frequently Asked Questions

How can I connect my Canon MG2920 printer to a new WiFi network?

Canon MG2920 Setup Guide:

  • Hold down the printer's Wi-Fi button until the alarm lamp flashes twice, then release the button.
  • Make Ensure the Wi-Fi lamp flashes quickly and the ON lamp illuminates.
  • Then return to the program screen and complete the setup.

How should I connect my Canon MG2920 printer to my computer?

Connect the Canon MG2920 printer to your computer using a USB wire. Connect the computer's flat USB cable connector and the printer's square connector. If your printer does not include a USB cable, you will need to provide one.

How can I connect my Canon MG2920 printer to my PC wirelessly?

With the device turned on, go to the ' set up' menu and select 'Wireless LAN setup'. Then select your wireless access point or router from the list, input your password, and press 'finish set up'. When the indicator turns solid blue, it means you are connected.

Why is my wireless Canon MG2920 printer connecting to my computer?

The Canon MG2920 printer not connecting to a computer or laptop can be due to various reasons such as loose connections, incompatible USB devices, outdated drivers, or network issues.

How can I connect my Canon MG2920 printer to my laptop using Bluetooth?

  • First, go to your laptop.
  • After that, access the Control Panel.
  • Now go to Printers and Devices, then Bluetooth Devices.
  • Next, turn on the Canon MG2920 printer.
  • And your Canon MG2920 setup is ready.
Category : Printer Blogs