If Your HP printer is printing blank pages, don't worry and rush it to a repair facility. You can save money on costly repairs by knowing the reasons why is Your HP printer printing blank pages and trying the methods listed below to fix it. This guide will provide you with a step-wise solution to fix your HP printer printing blank pages issue.

Why Is My HP Printer Printing Blank Pages

Few things are more frustrating than carefully assembling an important document or file and clicking print, only to have the printer spit out a completely blank sheet of paper, as fresh-faced as the day it left the dream. This issue could be caused by several factors, including:

• Ink or toner cartridges that have run out of ink or toner.
• Need to replace empty ink or toner cartridges. 
• Dislodged ink or toner cartridges
• The input tray may be loaded with the incorrect paper size.
• Clogged printhead nozzles result in the accumulation of clogged ink or toner.
• Blank pages in the document you're trying to print.
• Printer Drivers are outdated. 

The printer’s ink or toner has run out

Running out of ink or toner is a common reason why an HP printer prints blank pages or does not produce anything. If you've run out of ink or toner, read the printer's manual for advice on how to check the ink status and replace ink or toner.

You’re Using Third-Party or Low-Cost Ink Cartridges

Cheap or third-party ink cartridges may appear to be an appealing option to save money. These products, however, are often of lower quality and damage faster than their counterparts.

If the printer produces blank pages, cheap printer ink could be a cause. Only use high-quality OEM or name-brand ink in your printer.

Clogged Nozzle

A clogged nozzle blocks the printer from printing a quality page, which can result in the printing of blank pages. Check your nozzles for any blockage and clean or replace them as needed. 

Incorrectly Placed Cartridges

The most common cause of printing problems and blank pages is a faulty cartridge. A printer cannot print if the installation of the cartridge is incorrect. 

Paper Issues - Incorrect Paper Sizes

Paper is an important part of good document printing. However, using too thin paper can cause your printer to jam, cause other problems, or even harm it. 

Use high-quality printer paper, no less than 20 lb, and cut it to fit perfectly into the tray. In general, thicker paper produces better outcomes.

Continue reading to learn how to rapidly resolve these issues and get back to printing. Before you begin, make sure your printer is on a flat, even surface. A printer placed at an angle can cause improper connections with cartridges and cords, which could be the source of your blank page problem.

How To Fix HP Printer Printing Blank Pages Issue

When you press the print button on your HP printer, it prints a blank page. This is quite annoying, and you are not alone. A large number of HP users have reported it. However, before you call a printer repair agency, try the methods listed below. to fix your HP printer printing blank pages.

Method 1: Restart your printer

Turning off the printer, disconnecting any unnecessary wires, such as USB or Ethernet connections, and then restarting it by pushing the power button allows it to reset.

Disconnect the printer from the computer and restart both devices if it is connected via USB. Connect when prompted, and then try printing again. This has been the answer to why my HP printer printing blank pages.

Method 2: Check Estimated Ink Levels, Replace Ink Cartridges, and Align New Print Cartridge

Step-1: Check Estimated Ink Levels

1. Check the estimated ink levels on the printer control panel's Home screen. The ink levels are shown as "bucket" icons above the ink level indicator on the control panel.
2. Check whether any cartridges are low or empty:

• An exclamation mark (!) indicates that ink levels are low.
• A question mark (?) indicates that the product cannot determine the cartridge's state. This could be due to the cartridge having been renewed.

If ink cartridges are not low on ink, there is no need to replace them. If the ink cartridges are low on ink, follow the next step to replace them.

Step 2: Replace the Ink Cartridge

If you saw issues on the test page and the previous methods did not fix the issue, even if the cartridge is not low on ink, follow these instructions to replace it. The faulty cartridge is the one that printed the errors on the test page.

1. First, turn on your HP  printer by pressing the power button.
2. Then, open the cartridge access door.
3. Wait for the carriage to be idle and silent before gently pressing down on a print cartridge to release it.
4. Pull the cartridge out of its slot and toward you.
5. Remove the new cartridge from its packing, being careful not to touch anything other than the black plastic. To remove the plastic tape, use the pull tab.
6. Then, close the cartridge access door.

Step-3: Align Print Cartridge

Every time you install or replace a cartridge, the HP device requests you to align the cartridges. You can also align the cartridges at any point using the product control panel or the HP software. 

1. In the input tray, place unused, plain white, US letter or A4 paper.
2. On the control panel, press the Setup button.
3. Select Align Print Cartridge from the Tools menu.
4. The HP printer generates a self-test page and aligns the cartridges.

Method 3: Cleaning the Printhead (Automatic Cleaning)

If the print head becomes clogged or less effective after a long period of printing, perform an automatic cleaning of the printer's print head. You can do an automatic cleaning by following any of the following three steps:

1. Using software supplied by the printer's maker.
2. Select Service from the computer's program menu and then Print Head Alignment from the sub-menu.
3. Download a utility software tool that specializes in cleaning print heads from the internet, such as Printhead Fixer.

Method 4: Cleaning the Printhead (Manual Cleaning)

If the automatic cleaning method fails, you can try a manual cleaning procedure. 

When cleaning removable printhead areas, you can avoid exposing and cleaning the sponge area of the ink tank. Throughout the process, use protective gloves to avoid any direct touch with ink on your skin. Here's a step-by-step guide to manually cleaning a printhead:

1. Remove each Ink Cartridge unit from its slot by opening the Ink Cartridge Carriage and also remove the printhead from the carriage with care. 
2. Wipe away any dried ink on the Print Head with a clean, lint-free cloth wet in warm water. Continue cleaning the Nozzle area until no more black ink is visible on the fabric.
3. Soak the printhead for 10 minutes in a dish of warm water. Never use boiling water. Place a clean paper towel at the bottom and the print head atop it to soak. 
4. Remove the printhead from the bowl and wipe away any excess water and moisture with a dry, lint-free towel. Allow the printhead to air-dry for 15 minutes on top of a paper towel. Once completely dry, replace the printhead in the Carriage.
5. Before you begin printing, from your HP printer perform a Nozzle check to ensure that the printhead is clean.

Method 5: Run Windows Printer Troubleshooter

The HP printer sometimes has ink but still, your HP printer printing blank pages. Try using the computer's built-in troubleshooting facility for this. Do this to figure out "why my  HP printer only prints half the page, blanks, or the printer prints the test page but nothing else".

Windows 10 has a built-in tool for troubleshooting printing issues. To do this,  go to Settings and look under Troubleshooting. Then, from the results, click Resolve printing difficulties, which opens a wizard where you may specify the type of printer problem you're experiencing.

Method 6: Update the HP Printer Driver

When the printer has ink but prints blank pages, the issue is usually an outdated printer driver, and downloading & updating the printer driver is an easy fix 

To do this, you have to open Windows Update and see if any updated version of your HP Printer is available there or not. If any update is there, then update the printer driver and restart your computer. 

Method 7: Service your HP Printer

If you have a faulty cartridge or printhead, it may be covered under warranty. Go to HP Printer support and Page Yield Overview, then examine the limited warranty information for your printer to check the warranty on your ink or toner supplies.

Method 8: Run HP Print and Scan Doctor

The last option for fixing the issue is to use the HP Print and Scan Doctor. The instructions are as follows:

• You must download it from the official website.
• To install the HP Print and Scan Doctor, first open the downloaded file and then follow the on-screen instructions.
• Next, open the HP Print and Scan Doctor, click Start, and follow the on-screen prompts to fix the problem.

What if none of the solutions work?

If you've tried one or both of the methods suggested above and the problem remains, it may be time to get your HP printer serviced or repaired. In any case, you must contact HP customer service to schedule a repair or replacement. Check to see if your printer is now under warranty. If the warranty has gone, you may need to replace the printer entirely. 

How To Prevent HP Printer Printing Blank Pages?

Here are some suggestions to prevent HP printer printing blank pages:

• Keep the ink cartridges clean and debris-free.
• Keep your printing supplies in a cold, dry place.
• Do not overload the printer with too many papers at once.
• When you're not using the printer, turn it off.
• Refill the ink cartridges when they are low on ink.

Conclusion

These are several solutions to the "HP printer prints blank pages" problem.  You will be able to resolve the blank page issue by reading this. If you are still having problems, contact our experienced specialist on call. 

Frequently Asked Questions

How do I fix my HP printer printing blank pages?

Simple things to check to fix HP Printer printing blank pages:

1. Empty ink or toner cartridges that must be replaced.
2. Cartridges of ink or toner that have become dislodged from their right location.
3. In the input tray, the incorrect paper size was inserted.
4. Clogged printhead nozzles result in a buildup of blocked ink or toner.

Why is my HP printer printing blank pages when it has ink?

This may sound apparent, but it happens occasionally: First, make sure your paper tray is full of paper. Misalignment, blocked printheads, poor data transfer, and low ink levels can all be causes of the issue. 

Why is my printer connected but printing blank pages?

Check ink levels and alignment. To resolve printer printing blank pages, restart your printer and PC. To improve printing quality, make sure ink cartridges are properly placed and that print heads are not clogged.

Why is my HP Deskjet paper printing blank?

First, check the ink cartridges. You should check the ink levels on your printer because the "HP printer prints blank pages" error could be caused by low or empty cartridges. It is also advised that you remove and reinstall your cartridges.

Why isn’t my HP printer printing all the pages?

Make sure your page options are set to print all pages, including every page. Some pages do not print because of settings such as manual duplexing', 'printing every other page', 'printing odd pages', 'printing on both sides', or similar options.